Riso HC5000T User Manual - Menu 4 Configuration
2-17
2
Menu 4 Configuration
Functions concerning printing such as size and type of paper to be loaded in the feed trays and the Job Separation function can be set.
"
"
"
" Functions
The functions that can be set are shown below.
!
!
!
! 4.1 Standard Feed Tray
4.2 Feed Tray 1
4.3 Feed Tray 2
Set the size and type of paper to be loaded in the Standard Feed Tray and the other feed trays and turn on or off the Double Feed
Check function.
!
!
!
! 4.4 Feed Tray Relay #p.2-20
Sets whether or not to enable the Feed Tray Relay function that uses Feed Tray 1 and Feed Tray 2. If "4.5 Triple-Tray Source"
is set to "ON," feed trays including the Standard Feed Tray can be used for Feed Tray Relay.
!
!
!
! 4.5 Triple-Tray Source #p.2-21
Sets whether or not to include the Standard Feed Tray into feed trays for selection when instructing printing without specifying
the tray (Auto tray selection) from the printer driver.
!
!
!
! 4.6 Job Separation #p.2-22
Inserts separation paper between jobs or every division such as set or page when printing multiple sets.
!
!
!
! 4.7 Print Density #p.2-23
Selects the print density from five levels.
!
!
!
! 4.8 Paper Ejection#p.2-24
Sets the adjustment of the Auto Stacking Tray of Eject Wing and the Stack Guides.
!
!
!
! 4.9 Temp Data Clear #p.2-27
Clears temporary data in the printer.
!
!
!
! 4.10 Image Area #p.2-28
Sets the maximum print area.
!
!
!
! 4.11 Cover Sheet Tray #p.2-29
Sets the paper to be loaded in the Cover Sheet Tray of the optional HC Finisher.
fm.book 17 ページ 2005年7月28日 木曜日 午後4時34分