Tally T8006 User Manual - page 108
Tally T8006/T8306 Color Laser Printers User Guide
102
(continued)
Characters, lines, or graph-
ics do not completely print
out.
Characters, lines, or graph-
ics are incorrectly oriented.
The linefeed is incorrect or
out of phase.
The print data is printed
without being spooled.
If a file size is too large (mega-
bytes), the printer or the user’s
computer may go into a time-
out period or a sleep mode
before all data has been trans-
ferred and spooled.
Reduce the file size by break-
ing the file into smaller print
jobs.
Postpone the timeout or sleep
mode of the user’s computer
or printer (page 125).
If a file size is too large (mega-
bytes), the print data may be
printed without being spooled,
regardless if printer is set to
spool.
Reduce the file size by break-
ing the file into smaller print
jobs.
Set the printer to spool the
data before printing.
An incompatible printer driver
is being used.
Load the correct printer driver
(page 25).
Power surge, poor interface
connection, network prob-
lems.
Connect the printer properly.
Make sure software, network,
and operating environment is
compatible for printer.
Characters, lines, and
graphics are printed in
gray-scale instead of color;
or the printed output is
color instead of gray-scale.
The incorrect color mode is
selected.
Select the proper mode for
printing gray-scale (monochro-
matic) or color.
Poor Print Quality
Possible Cause
Correction