Tally T8006 User Manual - page 32
Tally T8006/T8306 Color Laser Printers User Guide
26
Setting up a Network Printer in Windows
Configuring Windows 95/98 to Print Using NetBEUI
The Tally auto-install CD-ROM automatically installs the drivers and
utilities your computer needs to print using the NetBEUI protocol. If you
are uncertain whether your network settings are correct for printing over
the network, consult your Windows 95/98 Help. To install the network
printer software on a computer using NetBEUI:
1. Insert the CD in your CD-ROM drive.
2. Click the language you want to use.
3. Click the
I Accept
button.
4. Click the
T8006 - Install Software
button or the
T8306 - Install
Software
button.
5. Click the
Network
button to configure the computer for network
printing.
6. Click the
Install Printer Driver
button to install the drivers.
7. Click the
Network Utilities
button to install the network utilities.
8. When prompted by the installation wizard, choose
Custom Install
.
9. When prompted by the installation wizard select install
NetPilot and
PrintMonitor
.
10. Click
Exit This CD
to complete the software installation process.
Note:
By default, your printer is installed on LPT1 — the physical
printer port of your computer. To print over the network, you must now tell
Windows to print over a virtual printer port rather than the physical port.
11. From the
Start
button, select
Settings
and click
Printers
.
12. In the Printers folder, right-click the
T8006
or
T8306
printer you just
installed.
13. Click
Properties
.
14. In the Printer Properties window, select the
Details
tab.
15. In the
Print to the following port
list, select the
printer name
.
LP1
port. By default the printer name is “PS” followed by six letters and
numbers of the print server’s node address; for example,
“PS1f83a5.LP1.” See “Test Button for LAN Configuration” on
page 147 to obtain a LAN configuration page with your print server’s
node address.
16. In the Printer Properties window, select the port you just added and
click
OK
.