Tally T8006 User Manual - page 35
Chapter 3 Installing Printer Drivers and Utilities
29
14. Change the name of the printer to the
name you would like it to have and
click the
Next
button. This name will
be the name shown on the network.
15. In the Network Environments dialog,
deselect all but the
TCP/IP
check
box and click the
Next
button.
16. In the TCP/IP address configuration
window, choose the way you want the
IP address of the printer to be config-
ured and click the
Next
button.
Note:
If you are uncertain about the IP address that should be used, consult your
network administrator.
17. Enter an eight character name that
your printer will have on your net-
work.
18. If you have a dedicated WINS server
on your network, select the WINS
check box and fill in the IP address of
the Primary and Secondary WINS
server. If you are unsure whether
your network is configured to use
dedicated WINS servers, do not
check the WINS box and click
Next
.
19. If you want to password protect your
configuration, select the
Set configu-
ration protection
check box, enter
the password in the box, and click
Next
.