Tally T8006 User Manual - page 98

Tally T8006/T8306 Color Laser Printers User Guide

92

Troubleshooting Jam 1

If jams occur often in the Jam 1 area, proceed to the following problem-

and-correction procedures.

Caution!  

Do not disassemble the printer for further troubleshooting and/

or repair. If the problem is not found and corrected after following these 

troubleshooting steps, contact a Tally Service Technician.

.

8. If the T8306 printer model has a 

feeder tray and it is out of the 

printer, pull the paper-feed guide 

rails outward, and align the tip of 

the tray with the guide rails. 

Insert the paper tray squarely and 

evenly back into the paper feeder. 

For T8006 printers with a paper 

feeder, use the same steps as 

main paper tray.

Note:  

Make sure that the four corners of the paper are aligned squarely and 

sit firmly in the paper tray.

9. Close the back cover carefully until it locks.

Jam 1

Possible Cause

Correction

Paper from the paper tray 

jams between the paper 

tray and the transfer drum.

Too many sheets of paper are 

in the paper tray.

Put the proper number of 

sheets of paper in the tray.

The paper guides do not guide 

the paper properly.

Adjust the paper guides to the 

paper size.

Paper from a previous paper 

jam is caught inside of the 

printer.

Remove or release the paper. 

The paper is damp from infre-

quent use of the printer.

Reload paper trays with fresh 

paper from new packages.

The paper or material is the 

wrong thickness for proper 

printer operation.

Reload trays with paper or 

material of the proper thick-

ness.