Tally T8006 User Manual - page 25

Chapter 2 Setting Up Your Printer

19

Setting the OPC Belt Counter to Zero

Printer software tracks OPC belt usage. After the counter reaches a pre-

set number, the printer displays a message to indicate that maintenance is 

necessary. After the first installation, and after every replacement of the 

OPC belt, set the counter to zero.

1. While pressing the power switch, 

press and hold MENU/

ENTER/ 

.

Note:  

For information about displayed 

error messages, see “Appendix D Control 

Panel Messages” on page 141.

2. When PLEASE WAIT is dis-

played, release MENU/

ENTER/  . The display will 

show 

Utility Menu Clear FC. 

Roll

.

3. Press either 

TRAY/

or 

MEDIA/

 until the display shows 

Clear 

BeltCG

.

4. Press MENU/ENTER/ . The display will show 

Clear BeltCG Not 

Execute

.

5. Press either TRAY/ or MEDIA/  until the display shows 

Clear 

BeltCG Execute

. 

6. Press MENU/ENTER/  . The display will show

Clear BeltCG 

Execute

.

7. Press MENU/ENTER/  . The display will show 

Completed Clear 

BeltCG.

8. Press MENU/ENTER/  . The display will show

 Utility Menu 

Clear BeltCG

.

9. Press   to exit the Utility Menu and return the printer to normal 

operating mode, or turn the power switch off.