Tally T8006 User Manual - page 86

Tally T8006/T8306 Color Laser Printers User Guide

80

7. Put several sheets of clean paper over the OPC belt cartridge to pro-

tect the photosensitive belt from light.

9. Using a dry cotton cloth, clean the surface of the glass.

10. On the T8006, slide the glass cover into the optical unit. On the 

T8306, rotate the glass cover toward the front of the optical unit.

11. Reinstall the OPC belt cartridge and toner cartridges.

12. Close top and front covers and plug in the printer power cord.

Cleaning the Inside of the Printer

Use a toner vacuum and a soft cotton cloth to clean the inside of the 

printer following the procedure below.

Caution!  

Before cleaning the inside of the printer, put a sheet of paper 

around the transfer drum so the toner vacuum does not touch the drum. Use 

only a dry cotton cloth to wipe the inside of the printer. Do not expose the 

OPC belt cartridge to light, and do not touch the surface of the OPC belt.

8. In the T8006, slide the glass cover out 

of the optical unit. On the T8306, 

rotate the glass cover toward the back 

of the optical unit.

1. Open the top and front covers.

2. Remove the toner cartridges.