Tally T8006 User Manual - page 81

Chapter 7 Cleaning the Printer

75

Cleaning the Paper Discharger

Use dry soft cotton cloth and a cotton swab to clean the transfer roller 

following the procedure below.

1. Turn off and unplug the printer.

2. Open the back cover of the printer.

3. Remove the paper discharger by slid-

ing it to the left, then lifting it out of 

its cradle on the right side.

4. Use a dry cotton cloth to remove any 

dust or toner on the exterior of the 

discharger.

5. Use a dry cotton swab to clean the 

paper discharger wire and the interior 

of the discharger.

6. Reinstall the paper discharger by inserting the left end of the paper 

discharger into the cradle, and then lowering the right side until it is 

fully seated.

7. Close the rear cover and plug in the printer power cord.