Tally T8006 User Manual - page 114
Tally T8006/T8306 Color Laser Printers User Guide
108
Paper size
If the paper size specified for the driver differs from the paper
size specified by the application, the print size may not be cor-
rect. Set the application and driver to use the same paper size.
If pages within a document specify different page sizes, the doc-
ument may not print correctly. Specify the same page size
throughout the document.
Performance
If you feel that monochrome printing speed is too slow, you can
speed up the printing by setting the printer driver to mono-
chrome.
Priority when different
settings are specified
When you customize print settings, you can do it at one of three
places: the application properties, the default driver settings and
at the printer control panel. Any application print settings that
you enter in the application’s Print Properties dialog will override
the default driver settings on a per-session basis. Your default
print driver settings will override any settings entered at the
printer control panel until they are changed.
Reduced Print from Word
If reduced printing and 2 pages/4 pages printing from MS-Word
is specified, printout may not be reduced. In such a case, specify
the same setting of paper size for the application.
Spool error
If a spool error occurs during printing, the system may stop
printing and the Printer window may be inaccessible. If this
occurs, delete data from the spooler and restart the computer.
Spool setting
If there is not enough memory installed in the printer to spool
the entire job, use the Printer Properties’ Scheduling tab to allow
the data to be printed directly. When printing directly, increase
the timeout setting significantly.
Timeout
When sending a large document, the printer resets before the
document is printed. This indicates that the printer or print
driver timeout setting is not set to a long enough interval. If this
occurs, set the printer and print driver timeout interval to a
greater value.
Network Problem
Possible Correction