Tally T8006 User Manual - page 15
Chapter 2 Setting Up Your Printer
9
Temperature
Make sure the temperature in the printer location stays constant. Keep the
printer away from direct sunlight. For best printer operation, install the
printer in a location where the temperature levels stay within the following
ranges:
Humidity
Excessive changes in humidity can cause unwanted condensation inside
the printer. For best printer operation, install the printer in a location
where humidity levels stay within the following ranges:
Power Source
Each printer model requires different types of electrical power, as shown
below. If you need additional information about the power requirements,
contact your dealer or a Tally Service Technician.
Warning!
Use properly grounded wall sockets. Do not use converter plugs.
Caution!
Use surge protection between the power source and the printer.
Fahrenheit
Celsius
Recommended range:
63.5º to 80.6º
17.5º to 27º
Permitted range:
50º to 90.5º
10º to 32.5º
Recommended range:
50% to 70%
Permitted range:
20% to 80%
Model 8306
Part Number: 083188
Voltage
120 VAC + 10%
Frequency
60 Hz + 2 Hz
Consumption
Up to 1,350 W
Model 8306
Part Number: 083186
Voltage
220 VAC to 240 VAC
Frequency
50 Hz + 2 Hz
Consumption
Up to 1,350 W
Model T8006
Part Number: 083218
Voltage
120 VAC + 10%
Frequency
60 Hz + 2 Hz
Consumption
Up to 1,350 W