Tally T8006 User Manual - page 171

Appendix E Network Management

165

For example, some PostScript drivers do not suffix the code (0x04), 

indicating the end of a job, to the print job. In this case, edit the following 

entry:

Replacing Character Strings

Replacement of up to 20 sets of character strings can be specified for each 

logical printer. 

All character strings must be entered as hexadecimal numeric characters. 

The count byte must be placed before a retrieval character string and 

before a replacement character string. 

For example, edit the following parameter in the config file to replace a 

UNIX line feed (0x0A) with a DOS line feed (0x0D 0x0A) for logical 

printer 1:

This is the default setting for logical printers 5 to 8. 

Conversion from ASCII to PostScript

To set PostScript conversion, you must turn on postscript filtering in the 

printer configuration file and set the page size, direction, format, and the 

font to be used. 

The default size is A4 and default orientation is portrait. 

To change these settings, use these parameters:

PR1_AFT.:04

PRI_AFT.:04

PR1_STR. : 01 0A 02 0D 0A

01

Count byte of the retrieval character string (length of the 

retrieval character string) 

0A

Retrieval character string

02

Count byte of the replacement character string (length of the 

replacement character string)

0D0A

Replacement character string 

Page Format

Default 

Value

Meaning

Number of lines per page 

(LPP)

66

Number of characters per 

line (CPL)

0

0 = Turn of a line invalid