Tally T8006 User Manual - page 132
Tally T8006/T8306 Color Laser Printer User Guide
126
SleepTime
SleepTime allows you to set the amount of time the printer will wait
before it enters sleep mode (from 5 to 240 minutes). When in sleep mode,
the printer uses less power (the default SleepTime setting is 30 minutes).
The following example shows how to change the SleepTime setting from
30 minutes to 15 minutes.
Tray1: LTR.
Tray1: LTR.
Tray1: LTR.
Tray1: LTR.
Timeout = 300*
Timeout = 300*
Timeout = 300*
Timeout = 300*
6. Press the key to enter the Timeout
submenu. The display shows the cur-
rent setting.
Tray1: LTR.
Tray1: LTR.
Tray1: LTR.
Tray1: LTR.
Timeout = 600
Timeout = 600
Timeout = 600
Timeout = 600
7. Using the and keys, select the
desired setting.
Tray1: LTR.
Tray1: LTR.
Tray1: LTR.
Tray1: LTR.
Timeout = 600*
Timeout = 600*
Timeout = 600*
Timeout = 600*
8. Press the key to enter the setting
into memory.
9. Press the
ONLINE
key to return to
online mode.
Tray1: EXE.
Tray1: EXE.
Tray1: EXE.
Tray1: EXE.
Ready
Ready
Ready
Ready
1. Check that “Ready” appears on the
display and the DATA light is off.
Tray1: EXE.
Tray1: EXE.
Tray1: EXE.
Tray1: EXE.
Not Ready
Not Ready
Not Ready
Not Ready
2. Press the
ONLINE
key to go
offline.
Tray1: EXE.
Tray1: EXE.
Tray1: EXE.
Tray1: EXE.
Test Menu
Test Menu
Test Menu
Test Menu
3. Press the
MENU
key to enter the
menu.
Tray1: EXE.
Tray1: EXE.
Tray1: EXE.
Tray1: EXE.
ConfigMenu
ConfigMenu
ConfigMenu
ConfigMenu
4. Using the and keys, select Con-
figMenu.
Tray1: EXE.
Tray1: EXE.
Tray1: EXE.
Tray1: EXE.
Timeout
Timeout
Timeout
Timeout
5. Press the key to enter Config-
Menu.