Tally T8006 User Manual - page 111

Chapter 9 Troubleshooting

105

(continued)

The printer does not print.

Print process has stopped 

and/or has stopped 

responding.

Intermittent printing.

Random characters and 

symbols are printed. 

The LAN Network interface 

cable is disconnected or is 

damaged.

Make sure the LAN Network 

interface cable is not damaged 

and properly connected. 

The logical printer is adding or 

replacing character strings.

Set the logical printer so it can-

not add or replace character 

strings.

Set the Network operating sys-

tem so it will not add text-code 

data.

Example 1: Set the Network 

operating system so it does not 

print the banner page at the 

end of the job.

Example 2: Disable the auto-

matic Form Feed or New page 

settings for NetWare®.

The operating mode for the 

parallel port does not match 

the printer operating mode.

Select the correct operating 

mode for the parallel port 

(page 131).

The LAN Network interface 

cable is disconnected, or it is 

damaged.

Check and connect the LAN 

Network interface cable.

Slow or No Printing

Possible Cause

Correction