Tally T8006 User Manual - page 23

Chapter 2 Setting Up Your Printer

17

Installing the Optical Photoconductor (OPC) Belt Car-

tridge

Caution!  

Do not touch or wipe off any powder that is on the OPC belt, or 

expose the OPC belt to light.

1. Open the top and front covers.

2. Lift the green OPC belt cartridge 

lock levers up until they unlock, 

with the channels upright.

3. With the top cover open, remove 

the protective sheet from the 

OPC belt cartridge.

4. Remove the two shipping pins 

from the OPC belt cartridge.

5. Slide the OPC belt cartridge 

downward along the green lock-

lever guides and into the printer 

carefully.