Tally T8006 User Manual - page 73

Chapter 6 Maintaining Your Printer

67

2. Pull and unlock the lever.

3. Open the top cover fully.

4. Turn the two green lock levers to 

unlock the used fuser cleaning roller.

5. Lift the fuser cleaning roller out of the 

printer. 

6. Discard the used fuser cleaning roller as 

indicated in “Disposing of Supplies” on 

page 71.

7. Insert the new fuser cleaning roller.

8. Turn the two green lock levers to lock 

the new fuser cleaning roller in place.

9. Close the top cover carefully until it 

locks.

Note:  

Set the fuser cleaning roller counter to zero after initial installation 

and replacement. For more information, see “Setting the Fuser Cleaning Roller 

Counter to Zero” on page 16.