Tally T8006 User Manual - page 154

Tally T8006/T8306 Color Laser Printer User Guide

148

2. While holding down the test button, turn on the printer. Keep the test 

button held down until the network LED starts to blink at one-sec-

ond intervals.

3. Release the test button and wait until the network LED blinks at least 

five times.

4. Hold the test button down again. When the network LED lights 

steadily, the function has completed.

5. Turn off the printer and then turn the printer on again to make the 

settings effective.

Note:  

When the default setting function is executed, the IP address 

(INT_ADDR parameter) is not reset to the default value.

Remote Configuration and Monitoring

The Tally T8006 and T8306 allow a network administrator to set up and 

change the printer’s network configuration through the Tally NetPilot and 

a number of on-board network servers. 

Using these tools, you can quickly configure the printer’s network settings 

from any computer on the network. 

Your Tally printer also allows you to monitor its state remotely through 

Tally’s PrintMonitor and the included Tally.MIB file for SNMB 

administration utilities.

Tally NetPilot

Tally’s NetPilot is an administration tool that allows 

you to quickly change the configuration of your 

printer from within Windows.

HTTP

HTTP allows you to change printer settings from any 

computer that has a Web browser.

FTP

FTP allows you to download a configuration file to 

your computer, edit it, and upload it to the printer.

Telnet

Telnet allows changes of the network configuration 

file from any computer or terminal.