Kawasaki KX250F - Owner's Manual - page 104
103
j
NOTE
○
Tighten the two clamp bolts alternately two times
to ensure even tightening torque.
•
Install the handlebars (see Handlebars section),
and check the steering again and readjust it if nec-
essary.
•
Check the front brake for the proper brake effect,
or no brake drag.
•
Install the removed parts.
Front Suspension
Front Fork Inspection
NOTICE
Sticking muds or dusts on the sliding surface
of the front fork could damage to the oil seal,
leading to an oil leak. Clean the sliding sur-
face after each ride.
•
Holding the brake lever, pump the front fork back
and forth manually to check for smooth operation.
•
Visually inspect the front fork for oil leakage, scor-
ing or scratches on the outer surface of the inner
tube.
•
If necessary, repair or replace by an authorized
Kawasaki dealer.