Kawasaki KX250F - Owner's Manual - page 115
114
j
NOTE
○
Protect the axle holder with a soft jaw or heavy
cloth when using a vise.
•
Loosen the adjuster assembly completely.
•
Compress the outer tube by hands and remove
the adjuster assembly from the axle holder part so
that the locknut appear about 20
∼
30 mm (0.79
∼
1.2 in.).
NOTE
○
When removing the adjuster assembly, do not
force to loosen it at once using an impact wrench.
A. Axle Holder Part
B. Left Front Fork Adjuster Assembly
•
Hold the locknut with a wrench and remove the left
front fork adjuster assembly.
NOTICE
When loosening the locknut, the threads of
the axle holder do not touch the push rod.
If the push rod is scratched, it is possible to
the damage in the cylinder unit.
A. Locknut
B. Wrench
C. Left Front Fork Adjuster Assembly
NOTICE
Removing the locknut and pushing the pis-
ton rod thread into the left front fork cylinder
unit will damage the oil seal. Do not remove
the locknut from the piston rod.