Kawasaki KX250F - Owner's Manual - page 130
129
j
A. Left Front Fork Cylinder Unit
B. Left Front Fork Outer Tube
C. Top Plug Wrench (Special Tool: 57001-1645)
•
Compare the length between the axle holder and
outer tube at assembly and at disassembly. There
should be same length.
•
If the length at assembly is longer than at disas-
sembly, check the left front fork adjuster assembly
and locknut installation.
Standard
Length
312
∼
316 mm (12.3
∼
12.4 in.)
Right Front Fork
•
Using the top plug wrench (special tool: 57001
-1645), remove the right front fork spring adjuster
unit from the right front fork outer tube and slowly
slide down the outer tube.
A. Top Plug Wrench (Special Tool: 57001-1645)
B. Right Front Fork Spring Adjuster Unit
C. Right Front Fork Outer Tube
•
Place a drain pan under the front fork and drain
fork oil.
NOTE
○
Pump the outer tube several times to discharge
the fork oil.