Kawasaki KX250F - Owner's Manual - page 149
148
j
Standard Oil
Amount
232 mL (7.84 US
oz.)
SOFT
(K = 9.2
N/mm)
Adjustable
Range
227
∼
375 mL (7.67
∼
12.7 US oz.)
Standard Oil
Amount
214 mL (7.24 US
oz.)
HARD
(K = 10.0
N/mm)
Adjustable
Range
209
∼
357 mL (7.07
∼
12.1 US oz.)
•
Replace the O-ring on the spring adjuster unit with
a new one.
•
Apply specified fork oil to the O-ring.
•
Raise the right front fork outer tube and temporar-
ily install the right front fork spring adjuster unit to
the outer tube using the top plug wrench (special
tool: 57001-1645).
A. Right Front Fork Spring Adjuster Unit
B. Right Front Fork Outer Tube
C. Top Plug Wrench (Special Tool: 57001-1645)
•
Compare the length between the axle holder and
outer tube at assembly and at disassembly. There
should be same length.
•
If the length at assembly is longer than at disas-
sembly, check the right front fork bottom plug and
locknut installation.
Standard
Length
312
∼
316 mm (12.3
∼
12.4 in.)
•
Install the front fork tubes to the motorcycle.
•
Tighten the front fork clamp bolts (lower) to the
specified torque.