Kawasaki KX250F - Owner's Manual - page 72
71
j
NOTICE
When installing the fuel hose joint, do not
apply strong force to the delivery pipe. The
pipe made from resin could be damaged.
•
Push and pull the fuel hose joints back and forth
more than two times, and make sure they are
locked and do not come off.
A. Fuel Hose Joints
B. Push and Pull
WARNING
Leaking fuel can cause a fire or explosion
resulting in serious burns. Make sure the
hose joint is installed correctly on the deliv-
ery pipe by sliding the joint.
NOTE
○
If it comes off, reinstall the fuel hose joint.
•
Fit the projection on the muffler body and hole on
the muffler clamp.
A. Projection
B. Hole
•
Install the muffler (see Exhaust System section).
•
Install the fuel tank (see Spark Plug section).
•
Install the removed parts.
•
Open and close the throttle a few times to make
sure the grip operates correctly.
•
Check the throttle cable play and idle speed ad-
justment.