Kawasaki KX250F - Owner's Manual - page 98
97
j
Brakes
Disc and disc pad wear is automatically compen-
sated for and has no effect on the brake lever or
pedal action. There are no parts on the brakes that
require adjustment except brake lever position.
Brake Lever Position
The brake lever position can be adjusted to suit
the rider’s preference.
•
To adjust the brake lever position, slide the front
brake lever dust cover back, and loosen the lock-
nut, and turn the adjuster to either side with a
wrench.
•
After adjustment, tighten the locknut securely.
A. Brake Lever
B. Adjuster
C. Locknut
•
Test the braking power and check that there is no
brake drag.
WARNING
Air in the brake lines diminish braking perfor-
mance and can cause an accident resulting
in injury or death. If the brake lever or pedal
feels mushy when it is applied, there might
be air in the brake lines or the brake may be
defective. Have the brake checked immedi-
ately by an authorized Kawasaki dealer.
Disc Brake Fluid
Inspect the brake fluid level in the front and rear
brake reservoirs and change the brake fluid in ac-
cordance with the Periodic Maintenance Chart. The
brake fluid should also be changed when contami-
nated with dirt or water.
Use only heavy-duty brake fluid as follows.
Front/Rear Brake Fluid :
DOT3 or DOT4
NOTE
○
The motorcycle is shipped with brake fluid DOT4
in the brake system.