Kawasaki KX250F - Owner's Manual - page 134
133
j
•
Hold the locknut with a wrench and remove the
right front fork bottom plug.
NOTICE
When loosening the locknut, the threads of
the axle holder do not touch the push rod.
If the push rod is scratched, it is possible to
the damage in the cylinder unit.
A. Wrench
B. Right Front Fork Bottom Plug
•
Compress the outer tube by hands and remove
the top plug wrench (special tool: 57001-1645).
When using the Fork Spring Compressor
(Special Tool: 57001-1771):
•
Set the fork spring compressor (special tool:
57001-1771) and a suitable jack as shown in the
figure.
A. Fork Spring Compressor (Special Tool:
57001-1771)
B. Suitable Jack
•
Put the heavy cloth on the fork spring compressor
(special tool: 57001-1771).
•
Set the front fork, with its upper side facing down-
ward, on the fork spring compressor (special tool:
57001-1771).