Kawasaki KX250F - Owner's Manual - page 126
125
j
A. Left Front Fork Cylinder Unit
B. Left Front Fork Outer Tube
C. Top Plug Wrench (Special Tool: 57001-1645)
•
Hold the axle holder with a vise.
NOTE
○
Protect the axle holder with a soft jaw or heavy
cloth when using a vise.
WARNING
If the axle holder is not securely clamped, the
front fork assembly may come out of the vise
when compressed, which could cause an ac-
cident resulting in injury. However, clamp-
ing the axle holder too tightly can damage it
which will affect riding stability. Use protec-
tive aluminum covers on the jaws of the vise
and do not tighten the vise excessively.
•
Insert the push rod into the piston rod.
•
Replace the O-ring on the left front fork adjuster
assembly with a new one and apply specified fork
oil to the O-ring.
•
Install the left front fork adjuster assembly to the
push rod.