Kawasaki KX250F - Owner's Manual - page 62
61
j
A. Adjuster
B. Locknut
•
With the engine idling, turn the handlebars both
ways and check if handlebars movement changes
the idle speed. If so, the throttle cable may be
improperly adjusted or incorrectly routed, or dam-
aged. Be sure to correct any of these conditions
before riding.
WARNING
Operation with improperly adjusted, incor-
rectly routed, or damaged cables could re-
sult in an unsafe riding condition. Be sure
the control cables are adjusted and routed
correctly, and are free from damage.
Throttle Body Assy
Idle Speed Adjustment
•
Thoroughly warm up the engine.
•
Turn the idle adjusting screw/choke knob to adjust
the idle speed 2 000
∼
2 100 r/min (rpm) by using
the engine revolution tester (The tester should be
followed by the method described by the manufac-
ture.).
A. Idle Adjusting Screw/Choke Knob
B. Tester
•
Open and close the throttle a few times to make
sure the idle speed does not change, and readjust
if necessary.
•
With the engine idling, turn the handlebars both
ways and check if handlebars movement changes