Kawasaki KX250F - Owner's Manual - page 121
120
j
A. 115
∼
123 mm (4.53
∼
4.84 in.)
B. Oil Level
•
Replace the O-rings on the left front fork base
valve assembly with new ones.
•
Apply specified fork oil to the O-rings and bushings
on the left front fork base valve assembly.
NOTICE
Do not damage the bushings when assem-
bling the left front fork base valve.
A. O-rings
B. Bushings
•
With the piston rod appear about 20 mm (0.79 in.)
from fully compressed, gently install the left front
fork base valve assembly slowly to the left front
fork cylinder unit.
NOTE
○
Plug the oil hole on the left fork cylinder unit with
finger.
○
While pulling the piston rod, install the base valve
assembly slowly and pushing down it fully.
○
If there is difficulty in assembling the base valve,
it may be because the oil level is too high. Check
the oil level in the left front fork cylinder unit.