Kawasaki KX250F - Owner's Manual - page 63
62
j
the idle speed. If so, the throttle cable may be im-
properly adjusted, incorrectly routed, or damaged.
Be sure to correct any of these conditions before
riding.
WARNING
Operation with damaged cables could result
in an unsafe riding condition. Replace dam-
aged control cables before operation.
NOTICE
This motorcycle’s radiator does not incorpo-
rate cooling fan. Prolonged idling of the en-
gine with no airflow through the radiator can
cause coolant loss and engine overheating
resulting in possible engine damage. Any
riding conditions that increase engine tem-
perature will further reduce idling time be-
fore coolant loss occurs. These conditions
include high ambient temperature, sandy or
muddy terrain, or other conditions causing
high engine loads at low speeds. Further-
more, warming the engine up excessively be-
fore operation, or leaving idling with the hot
engine temperature after operation results in
the engine overheating, too.
Cleaning the Throttle Body Assy
•
Remove the seat (see Air Cleaner section).
•
Remove the fuel tank (see Spark Plug section).
•
Remove the bolt and take off the side cover on
both sides.
A. Bolt
B. Side Cover