Kawasaki KX250F - Owner's Manual - page 54
53
j
•
Push and pull the fuel hose joint back and forth
more than two times, and make sure it is locked
and does not come off.
A. Fuel Hose Joint
B. Push and Pull
WARNING
Leaking fuel can cause a fire or explosion
resulting in serious burns. Make sure the
hose joint is installed correctly on the deliv-
ery pipe by sliding the joint.
NOTE
○
If it comes off, reinstall the fuel hose joint.
•
Hook the band to the fuel tank.
•
Tighten the fuel tank mounting bolt.
•
After installing the fuel tank, make sure that both
throttle cables (outer) move slightly by pulling
them back and forth in the upper space of the
right side of the fuel tank. Check that both throttle
cables run under the frame (right side).
A. Throttle Cables
B. Fuel Tank
C. Bottom of the Frame (Right Side)
•
Temporarily tighten the radiator shroud bolts fol-
lowing the tightening sequence.