Kawasaki KX250F - Owner's Manual - page 27
26
j
DFI Setting Data Selection
Three DFI settings are available to suit various
track conditions. They are easily activated by chang-
ing the wiring connector on the side of the frame
when the engine is stopped.
Track Condition
Connector Color
Soft
White
Standard
Green
Hard
Black
•
Change the connector on the right front of the
frame to suit the track condition with the engine
stopped.
A. Connector
NOTE
○
If the connector is changed while the engine is
running, the DFI setting does not change.
○
The ECU is set to the standard track condition
when operated without a connector. However, al-
ways have one of the three connectors attached
when riding to prevent dust and mud from accu-
mulating in the connector harness.
○
The KX FI calibration kit (Part No. 99999-0394)
can be used for changing the DFI setting.