Oce im5530 Operator's Manual - page 102
98
3.SETTING OF BASIC COPY MODES
3.Selecting Finishing Modes (Cont.)
3
Staple sort mode
When the Finisher or the Saddle Stitch Finisher (both optional) is installed, automatic stapling is enabled.
You can select the stapling position from three types.
•
The paper weight applicable for this mode is 17 to 28 lb. Bond.
•
Special paper such as OHP films or sticker label cannot be used for stapling.
•
Copies in different size cannot be stapled.
When the lengths of the copies are the same, they can be stapled even if their sizes are different.
(Example of selecting the [FRONT STAPLE SORT] button)
Setting the staple sort mode
1
Place paper in the drawer(s).
• When using this mode in bypass copying, specify the paper size in advance. (
P.69 “6.Bypass Copying”)
2
Place the original(s).
3
Press the finisher button on the basic menu.
AB
AB
AB