Oce im5530 Operator's Manual - 345
345
12
•
The bypass copying speed is as listed above when specifying the paper size; however when the paper
size is not specified, the copy speed of all sizes is on ‘*1’.
•
The values above are measured when originals are set on the original glass, 1-sided, 100% and non-
sort multiple copies are made.
•
“Face up” and “Face down” in the table mean the paper exit faces.
•
Only LT-sized paper can be set in the Tandem Large Capacity Feeder.
•
This specification varies depending on the copying conditions and the environment.
•
The paper mentioned above is Océ-recommended paper.
Reversing Automatic Document Feeder
Copy sides
1-side, Duplex
Number of originals (LT)
100 originals or less than 0.63" in height (13 - 20 lb.)
Feeding speed
600 dpi: 71 sheets/min.
300/150 dpi: 83 sheets/min.
400/200 dpi: 79 sheets/min.
Acceptable originals
LD - ST-R, A3 - A5-R (ST and A5 are not acceptable)
Paper weight
13 - 34 lb. (1-sided original), 13 - 28 lb. (2-sided original)
Power source
Power supplied from the equipment