Oce im5530 Operator's Manual - 2. Turning Power On / Off

29

1

2. Turning Power On / Off

Turning power on

Open the switch cover, and then turn the power switch on.

•

The equipment starts warming-up. “Wait Warming Up” appears during warming-up.

•

While the equipment is warming up, you can use the auto job start function.

(

 P.65 “3.Auto Job Start (Job Preset)”)

The equipment will be ready for copying after about 130 seconds and "READY" appears. When you turn 

the power of the equipment OFF, do not simply turn the power switch to turn it off but be sure to shut it 

down. 

 P.34 “Turning power off (Shutdown)”

When the use of the equipment is managed under department management or user management func-

tion, you need to enter the department code or user information before making a copy. 

For details, see 

 P.30 “When department or user management is used”.