Oce im5530 Operator's Manual - page 26
22
1.BEFORE USING EQUIPMENT
1.Description of Each Component (Cont.)
1
Other options available are as follows. Contact your service technician or Océ product distributors for
details.
FAX Unit (im7230040)
This is a unit for using the equipment as a Fax.
•
Installed inside of the equipment
•
The PCI Slot is necessary.
Printer Kit (im7230010)
This kit enables the printing function.
Printer/Scanner Kit (im7230020)
This kit enables the printing and scanning functions.
Scanner Kit (im7230030)
This kit enables the scanning function.
Data Overwrite Kit (cm4530330)
This is a kit to erase the data stored temporarily when copying, printing, scanning, Fax, internet Fax or net-
work Fax is performed. It overwrites temporarily stored data with random data.
•
Installed inside of the equipment
Scrambler Board (cm4530290)
This board enhances the security of the equipment. Data are encrypted when they are written into the hard
disk of the equipment, and decrypted when they are read.
•
Installed inside of the equipment
•
The PCI Slot is necessary.
Parallel Board (cm4530290)
This unit is used to connect between the equipment and a PC with a parallel cable.
•
The PCI Slot (GO-1050) is necessary.
Wireless LAN Module (cm4530300)
This module enables the equipment to be used in a wireless LAN environment.
•
Installed inside of the equipment
•
The Antenna (GN-3010) is necessary.
•
The equipment cannot be connected to the wireless and wired LAN at the same time.
Bluetooth Module (cm4530310)
This module enables the Bluetooth printing.
•
Installed inside of the equipment
•
The Antenna (GN-3010) is necessary.
Antenna (cm4530320)
This is used when the Wireless LAN module and Bluetooth Module are installed.
Finisher Guide Rail (ZD6500010)
This unit is used when the equipment is installed on soft surface flooring. This allows you to separate/
install an optional finisher from/to the equipment easily.