Oce im5530 Operator's Manual - 130

130

5.USING THE EDITING FUNCTIONS

5

2. EDGE ERASE

If the original has a dirty or torn edge, it may be reproduced as a black stain on the copy. In that case, set 

the edge erase. A white border is created along the edges of the copy, eliminating those black stains.

•

This function is available only in the case of standard-size originals.

•

The width of the edge erase margin can be adjusted in 1 mm increments.

1

Place paper in the drawer(s).

• When using this mode in bypass copying (

 P.69), be sure to specify the paper size.

2

Place the original(s).

3

Press the [EDIT] button to enter the edit menu, and then press the 

[EDGE ERASE] button.

4

Adjust the width by pressing the [2 mm] or [50 mm] button, and then 

press the [ENTER] button.

• The default width of the white border is 5 mm (0.197").

• Select other copy modes as required.

5

Press the [START] button.