Oce im5530 Operator's Manual - Notice To Users

5

Notice to Users

USE OF RECYCLED PAPER IN THE COPIER

As with all copiers and reproduction devices, the use of the appropriate paper ensures the best image 

quality of the copies and the machine’s performance and reliability.

Because of the extreme variances in composition and quality of paper from various manufacturers, con-

sumers should ensure the recycled paper they use is suitable for the copier. 

If you have any questions regarding the use of recycled paper in your copier, contact your authorized 

service technician.

FCC NOTICE

This equipment has been tested and found to comply with limits for a Class A digital device, pursuant to 

Part 15 and Part 18 of the FCC Rules. These limits are designed to provide reasonable protection 

against harmful interference when the equipment is operated in a commercial environment. This equip-

ment generates, uses and can radiate radio frequency energy and, if not installed and used in accor-

dance with the instruction manual, may cause harmful interference to radio communications. Operation 

of this equipment in a residential area is likely to cause harmful interference in which case the user will 

be required to correct the interference at his own expense.

WARNING:

Changes or modification made to this equipment, not expressly approved by Océ or parties authorized 

by Océ could void the user’s authority to operate the equipment.

This Class A digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada.

User Safety

This Océ multifunctional digital systems does not produce laser radiation hazardous to the user. It is cer-

tified as a Class 1 laser product under the U.S Department of Health and Human Services (DHHS) Radi-

ation Performance Standard according to the Radiation Control Health and Safety Act of 1968.

Protective housing and external covers completely confine the laser beam light emitted inside the multi-

functional digital systems. The laser beam cannot escape from the machine during any phase of user 

operation.

Regulations implemented on August 2, 1976 by the Bureau of Radiological Health (BRH) of the U.S 

Food and Drug Administration apply to laser products manufactured from August 1,1976. Laser products 

marketed in the United States must comply with these regulations.

Caution

Using controls or adjustments or performing procedures, other than those specified herein may result in 

hazardous radiation exposure.