Oce im5530 Operator's Manual - page 74

70

2.HOW TO MAKE COPIES

6.Bypass Copying (Cont.)

2

Bypass copying on standard size paper

Making bypass copies on LD, LT, LG and ST-R

2

Place the original(s).

3

Press the button of the same size as the one of the paper you have set 

on the tray.

• If the paper size is not specified here, copying may be slowed down.

1

Place some sheets of paper with their 

copy side up on the bypass tray. Align 

the side guides to the paper length while 

holding A.

• The message “Ready for bypass feeding” appears.

• Rear side of the side guides of the bypass tray has an indicator 

for paper height. The height of the sheets must not exceed this 

indicator.

• When you use more than one sheet, fan the sheets well before 

setting them on the tray.

• Do not push the sheets into the entrance of the bypass feeder; 

this may cause a paper jam.

When the paper size is larger, draw out the three-stage paper 

holder.

A