Oce im5530 Operator's Manual - 169
169
5
17. TAB PAPER
Tab paper copying and insertion are available. There are the following 3 modes.
1. Copying on the tab of tab paper ([COPY ON TAB])
2. Inserting blank tab paper prior to a selected page ([BLANK TAB INSERT])
3. Combination of copying on tab paper and inserting tab paper ([COPIED TAB INSERT])
•
Before copying on tab paper, adjust the tab width. (
P.172)
•
The tab paper can be set in any one drawer and the bypass tray except Large Capacity Feeder. (The
recommendation is to set in the 2nd drawer.)
•
Be sure to set “TAB PAPER” for the drawer for special uses. (
P.47 “Drawer for special uses”)
•
Only LT/A4 can be used in this mode.
•
When the optional finisher is attached to the equipment, only 5 or 8-bank tab paper is available.
Preparing an original to copy on the tab of the tab paper
LT/A4 originals are used. In copying on tab or copied tab insert, the image is shifted to copy the index of
the original on the tab position.
1
2
3
Original
* The shift width means the distance that
image should be shifted when copied
on the tab paper.
Shift width*
Tab width
Tab paper
By setting the tab width and shift width, the image is shifted to copy the index of the original on the tab position.