Oce im5530 Operator's Manual - 4. Interrupt Copying

67

2

4. Interrupt Copying

While continuous copying is in progress, you can interrupt this job with another copy job.

The following features cannot be used together with interrupt copying:

•

Cover sheet copying

•

Sheet insertion copying

•

Job build

•

Store to e-Filing / Copy & File

•

[e-FILING] / [SCAN] / [FAX] buttons

•

To enable “Copy & File”, the Scanner Kit or the Printer/Scanner Kit (both optional) is required.

•

The [SCAN] button is enabled only when the Printer/Scanner Kit or the Scanner Kit (both optional) is 

installed.

•

The [FAX] button is enabled only when any of the FAX Unit, Printer/Scanner Kit and Scanner Kit (all 

optional) is installed.

2

Replace the original with a new one.

• Set other copy modes as required.

3

Press the [START] button on the control panel.

4

After you have finished the interrupt copying, press the [INTERRUPT] 

button again.

• The message “READY to resume job 1” appears and the interrupted job resumes.

Interrupt copying is automatically canceled after a certain period by automatic function clearing without the need 

to press the [INTERRUPT] button again. The interrupted job (= Job 1) resumes after this automatic function 

clearing.

1

Press the [INTERRUPT] button on the 

control panel.

• The [INTERRUPT] button blinks first, then lights after “Job inter-

rupted job 1 saved” appears.

When the [INTERRUPT] button is pressed while originals are 

being scanned, the [INTERRUPT] button blinks first. Then the but-

ton lights after “Job interrupted job 1 saved” appears when the 

scanning is finished.