Oce im5530 Operator's Manual - page 78

74

2.HOW TO MAKE COPIES

6.Bypass Copying (Cont.)

2

Bypass copying on non-standard size paper

Non-standard size paper should be within the following ranges:

A (Length): 3.9" to 11.7", B (Width): 5.8" to 17"

2

Place the original on the original glass.

1

Place some sheets of paper with their 

copy side up on the bypass tray. Align 

the side guides to the paper length while 

holding A.

• The message “Ready for bypass feeding” appears.

• Rear side of the side guides of the bypass tray has an indicator 

for paper height. The height of the sheets must not exceed this 

indicator.

• When you use more than one sheet, fan the sheets well before 

setting them on the tray.

• Do not push the sheets into the entrance of the bypass feeder; it 

may cause a paper jam.

When the paper size is larger, draw out the three-stage paper 

holder.

A

B

A