Oce im5530 Operator's Manual - 230

230

7.TEMPLATE

3.Changing Data of User Groups and Templates (Cont.)

7

5

Select the button of template to be changed, and then press the 

[EDIT] button.

• If the desired template is not displayed on the menu, press the [Prev] or [Next] button to switch the menu.

6

Key in the password (5 digits) for the selected template, and then 

press the [ENTER] button.

• If no password was set when the template was registered, skip to step 7.

7

Press the [NAME1] button and the [NAME2] button, and then enter the 

new name of the template.

• When the [NAME 1] or [NAME 2] button is pressed, the letter entry menu (

 P.28) is displayed. Up to 11 char-

acters can be entered.

• The following symbols cannot be used for [NAME 1] and [NAME 2].

["], [=], [|], [*], [], [?], [+], [[], []], [;], [:], [/], [\], [,], [.]