Oce im5530 Operator's Manual - 276

276

8.JOB STATUS

6.Error Code (Cont.)

8

2D40

Failed to convert 

image file format

Turn the power OFF and then back ON. Retry the scan. If the 

error still occurs, contact your service representative.

2D60

Failed to copy file

Turn the power OFF and then back ON. Retry the scan. If the 

error still occurs, contact your service representative.

2D62

Failed to connect to 

network destination. 

Check destination 

path.

Check destination path.

Make sure that the network path is correct, and retry the scan. If 

the error still occurs, ask your administrator to confirm whether 

the IP address or path of the server is correct. Also make sure 

that the server is operating properly.?

2D63

Specified network path 

is invalid. Check desti-

nation path.

Make sure you specify correct network folder and retry the scan.

2D64

Logon to file server 

failed. Check user-

name and password.

Make sure you specify correct user name and password to 

logon the file server and retry the scan.

2D65

There are too many 

documents in the 

folder. Failed in creat-

ing new document.

Delete the data in the local storage folder in the equipment and 

retry the scan.

2D66

Failed to process your 

job. Insufficient stor-

age space.

Delete the data in the local storage folder in the equipment and 

retry the scan.

2D67

FTP service is not 

available.

Ask your administrator whether the FTP service is configured 

correctly.

2D68

File Sharing service is 

not available.

Ask your administrator whether the SMB protocol is enabled.

2DA8

The HDD is running 

out of capacity for the 

shared folder.

Delete the unnecessary data in HDD.

2DC0

Job canceled

Job was canceled.

2DC1

Power failure occurred Make sure that the power cable is connected properly and it is 

inserted securely. Resend the job.

Store to e-Filing

2B10

There was no applica-

ble job.

Turn the power OFF and then back ON. Retry the scan. If the 

error still occurs, contact your service representative.

2B11

Job status failed.

Turn the power OFF and then back ON. Retry the scan. If the 

error still occurs, contact your service representative.

2B20

Failed to access file.

Turn the power OFF and then back ON. Retry the scan. If the 

error still occurs, contact your service representative.

2B21

Message size 

exceeded limit or maxi-

mum size

Fragment the message into several smaller-sized ones and 

send them again.

2B30

Insufficient disk space. Delete unnecessary documents in e-Filing and try again.

Error code

Problem

What to do