Oce im5530 Operator's Manual - 3. Energy Saving Mode

37

1

3. Energy Saving Mode

This equipment supports three energy saving modes; the Automatic Energy Save mode, the Off mode and 

the Sleep Mode.

Automatic Energy Save Mode

The equipment enters the Automatic Energy Save mode automatically after a specified period of time 

*1

since its last use. During this mode, "Saving energy - Press START button" appears on the touch panel.

Off Mode

The equipment enters the Off mode automatically after a specified period of time 

*2

 since its last use. The 

equipment is automatically shut down and the power switch is turned off.

•

This mode is applied only to the copier model.

•

Turn the power switch on again to use the copier.

Sleep Mode

The equipment enters the Sleep Mode automatically after a specified period of time 

*2

 since its last use. 

During this mode, the message of the Automatic Energy Save mode disappears and the [ENERGY 

SAVER / SHUTDOWN] button lights in green.

•

This mode is applied to the multifunction model with any of the FAX Unit, Printer/Scanner Kit and 

Scanner Kit (all optional) installed.

•

This mode is automatically cleared upon the reception of print data, Fax data, Internet Fax data or E-

mails. It is also cleared by pressing the [START] button.

*1 This period is set at 15 minutes by factory default.

*2 This period is set at 90 minutes by factory default.

See the User Functions Guide to change the default settings noted above.

If ‘Automatic Energy Save’ and ‘Off Mode’/’Sleep Mode’ have the same setting time, ‘Off Mode’/’Sleep 

Mode’ takes priority.

The equipment can also be made to enter the sleep mode manually by means of the following procedure.

1

Press the [ENERGY SAVER] button on 

the control panel.