Oce im5530 Operator's Manual - 338

338

11.MAINTENANCE

2.Simple Troubleshooting (Cont.)

11

Display does not change when buttons or icons are pressed

Functions cannot be set

Image density is too low

Item to be checked

Countermeasure

Reference page

Is the equipment in the energy 

saving mode (Automatic energy 

saving mode)?

Press the [ENERGY SAVER] or 

[START] button on the control 

panel to clear the mode. (It 

takes a while for the equipment 

to become ready.)

 P.37 “3.Energy Saving Mode”

Is the power OFF because the 

weekly timer functions?

Press the [START] button to 

return the power ON.

See the [User Function Guide]

When the use of the equipment 

is managed under department 

management, is the correct 

code entered?

Key in the correct department 

code.

 P.30 “When department or user 

management is used”

When the use of the equipment 

is managed under user man-

agement, is the correct informa-

tion entered?

Enter the user information cor-

rectly.

 P.30 “When department or user 

management is used”

Is the “Warming up” message 

displayed?

Wait until the equipment 

becomes ready.

 P.29 “Turning power on”

Item to be checked

Countermeasure

Reference page

Are there functions that cannot 

be combined set together?

See the copying function combi-

nation and image quality adjust-

ment combination matrices and 

set again.

 P.349 “4.Copying Function 

Combination Matrix”

Item to be checked

Countermeasure

Reference page

Has the message “Install new 

toner cartridge” appeared on the 

screen?

Replace the toner cartridge.

 P.284 “Toner cover symbol”

Is the image density or back-

ground adjustment set lighter 

than standard?

Use the manual density buttons 

or the background adjustment 

function to adjust the image 

density properly.

 P.117 “6.Copy Density Adjust-

ment”, 

 P.120 “1.Background 

Adjustment”