Zeiss HUMPHREY 720i User Manual - page 105
REV. B 02/03 PN 51680-1
HUMPHREY FIELD ANALYZER II -
i
series
TESTING
5-15
To get a copy of the results immediately following a test (or during a pause for partial results),
select the PRINT FUNCTIONS icon button. This takes you to the Printout Selection screen. See
Figure 5.6 below.
The top of the Printout Selection screen shows the current test(s). If the PRINT FUNCTIONS
icon button was selected before the second eye was tested, or if only one eye was intentionally
tested, then only a single test will appear. If test results for both eyes are available, the printouts
may be printed at the same time. There are different printout selections for screening and
threshold tests.
The two available screening print formats are Screening Test, which prints each test on a
separate page, and Both Eyes (or OU), which condenses the two test results to one page. There
are several threshold print formats: Single Field Analysis, Overview, Change Analysis, Glaucoma
Change Probability Analysis, and Three-in-One. Only the Three-in-One is a non-STATPAC
format. Refer to Section 7 for a detailed description of each format and printing instructions.
You do not have to print results immediately following a test from the Test Complete screen. By
saving test results to disk, you have the ability to print at any time convenient to you by means
of the PRINT FUNCTIONS icon button. You can also print the test results of the last right and
left eye tested through RECALL LAST TEST on the Main Menu screen, providing the instrument
was not turned off. The Test Complete screen will be displayed when viewing a test via RECALL
LAST TEST.
Figure 5.6: The (Threshold) Printout Selection Screen
5.htp
3/14/03, 3:15 PM
15