Zeiss HUMPHREY 720i User Manual - page 244
Manual is about: FIELD ANALYZER II - i series
of
328
11-36
KINETIC TESTING
REV. B 02/03 PN 51680-1
HUMPHREY FIELD ANALYZER II -
i series
4
Press SELECT START POINT.
A diamond appears at the
position you have chosen.
5
Move the cursor to the
area where you wish the
test point to run towards (the
End Point).
6
When you have located that
position, press SELECT END
POINT. The stimulus will begin
moving when SELECT END POINT
is activated.
During the test a small diamond
moves across the video display. It
displays the progress of the
stimulus in the test bowl.
diamond
diamond
11.htp
3/13/03, 3:01 PM
36