Zeiss HUMPHREY 720i User Manual - page 217
Manual is about: FIELD ANALYZER II - i series
of
328
11-9
REV. B 02/03 PN 51680-1
HUMPHREY FIELD ANALYZER II -
i series
KINETIC TESTING
There are two ways to choose the points that define the isopter. One is to use a cursor to point
at the meridian to test. The other method involves using the keypad and entering the meridian
along which to start the stimulus.
The present screen is in the
Cursor mode. To switch to the
Keypad, press USE KEYPAD.
This screen is in the Keypad
mode. To switch to the Cursor
mode, press USE CURSOR.
Choosing meridians by
cursor or keypad
11.htp
3/13/03, 3:01 PM
9