Zeiss HUMPHREY 720i User Manual - page 201

CUSTOM TESTING

10-13

REV. B 02/03 PN 51680-1

HUMPHREY FIELD ANALYZER II - 

i 

series

2

A message will appear in

the pop-up window, “Are

you sure you have entered all the

points for this test?”

Press NO if you need to add more

points. Press YES if you have

entered all test points and are

now ready to advance to the

Parameter Setup screen.

3

Make any desired

changes to the default

parameters.

Press SELECTION COMPLETE.

If you are creating a Custom

Screening test, the Screening

Parameter Setup screen will

appear.

Note: SITA Standard and SITA Fast are not available for use with Custom tests.

4

 Name the completed

Custom test.

Press YES if you wish to personal-

ize the Custom Test. Press NO if

you wish to use the default name:

“Custom Threshold” (or “Custom

Screening”).

Note: If you choose not to use unique names to identify your Custom test patterns, then

more than one Custom test can be named Custom Threshold (or Custom Screening). It is

recommended that you add information as described in the following step.

10.htp

3/14/03, 2:43 PM

13