Zeiss HUMPHREY 720i User Manual - Statpac

REV. B 02/03 PN 51680-1

HUMPHREY FIELD ANALYZER II -

 i

series

STATPAC

™

 Analysis & Printing Results

7

Introduction to STATPAC Analysis

7-2

Threshold Test Printout Formats

7-4

SITA Printout Formats

7-21

Blue-Yellow Printout Formats

7-23

Printing Current Threshold Test Results

7-25

Screening Printout Formats

7-26

Printing Current Screening Test Results

7-27

Printing Previously Saved Test Results

7-28

Grayscale Symbols

7-30

Remote Printer Access

7-30

Humphrey Field Analyzer II printouts provide important information both in diagnosis and

continued care. They document a patient’s current visual field status as well as changes in

sensitivity over time. Coupled with Humphrey’s STATPAC software, HFA II printouts provide

access to sophisticated statistical analysis of visual field results.

Section 7 describes the available print formats and how to generate

printouts both immediately after testing and from stored files. After

reading this section you will be able to answer the following questions:

• What parameters must be used to get a STATPAC analysis for a white

stimulus test? For Blue-Yellow testing?

• How do I print an Overview printout?

• How do I change the baseline visual fields when using the Glaucoma

Change Probability Analysis?

• How are Change Analysis box plots determined?

• What should I do if a printer stops printing while I am using the HFA II?

7.htp

3/14/03, 3:17 PM

1