Zeiss HUMPHREY 720i User Manual - page 161
FILE FUNCTIONS
8-15
REV. B 02/03 PN 51680-1
HUMPHREY FIELD ANALYZER II -
i
series
To copy tests:
This function copies one or more tests from one disk to another, leaving the original record
unchanged.
1. Start at the File Functions screen. Select COPY TESTS.
2. Designate the Source and Destination disks and Directory Order, then PROCEED.
3. Select the test(s) you want to copy or SELECT ALL to copy all tests saved on the Source.
4. Select PROCEED to begin copying tests.
5. The selected tests will be added to the information on the Destination disk without
affecting the information already stored there.
To move tests:
This function moves tests to a different disk and then automatically deletes the original
record from the source disk.
1. Start at the File Functions screen. Select MOVE TESTS.
2. Designate the Source and Destination disks and Directory Order, then PROCEED.
3. Select the test(s) you want to move or SELECT ALL to move all tests saved on the Source.
4. Select PROCEED to begin moving tests.
5. The selected tests will be removed from the Source and added to the Destination disk
without affecting the information already stored on the Destination disk.
To delete tests:
This function deletes test records from the designated disk.
1. Start at the File Functions screen. Select DELETE TESTS.
2. Designate the Source disk and Directory Order, then PROCEED.
3. Select the test(s) you want to delete or SELECT ALL to delete all tests on the designated
Source disk.
4. Select PROCEED. A pop-up window will ask, “Are you sure?” Choose YES to permanently
delete the designated tests or CANCEL to return to the directory.
Caution: All tests deleted using the DELETE function are permanently erased from
the disk. Once the DELETE function has begun, it can be stopped by pressing
CANCEL, but tests already deleted before CANCEL was pressed are not recoverable.
8.htp
3/14/03, 3:18 PM
15