Zeiss HUMPHREY 720i User Manual - page 264
11-56
KINETIC TESTING
REV. B 02/03 PN 51680-1
HUMPHREY FIELD ANALYZER II -
i series
Deleting existing kinetic
tests
You may find you wish to add more Custom Kinetic tests than the Kinetic test menu has room
for. You may wish to delete existing tests you do not plan to use. Any of the buttons on the
Kinetic Test menu may be deleted.
1
From the Main Menu screen, press the SYSTEM SETUP Icon. Next press ADDITIONAL
SETUP. Press CUSTOM TEST.
2
Press DELETE KINETIC TEST.
3
Choose the test you wish to delete by pressing the appropriate button. Confirm that this is
your intention.
Note: The “BG/FS Kinetic” test is created specifically for Germany. The test is identical to the
“Standard 30” kinetic test.
All three of the pre-defined kinetic test patterns are limited to presenting only one isopter. You
may wish to create your own Custom kinetic test using the same meridians as any of these tests
with the added flexibility of being able to plot multiple isopters as desired. The original, one
isopter sequence could then be deleted from the menu.
Be careful not to delete the top button on the menu: the MANUAL KINETIC TEST. Should you
accidently delete this button, reloading the software will restore the manual kinetic ability to
your HFA II.
Remember, if you plan to use certain tests from the Kinetic menu often, it is recommended to
create a new button on the Main Menu. Further explanation is provided in Section 2 under
“Altering the Main Menu”.
11.htp
3/13/03, 3:01 PM
56